Staff Login



Latest News

UHPC Beam Technical Exchange and Full Scale Failure Test Observation Meeting of Zhongshan to Kaiping Expressway Project Successfully Held in Jiangmen, Guangdong.


6. The participants were learning the historical moments about UHPC bridge fieldsUltra High Performance Concrete (referred to as “UHPC”) in the  application of bridge engineering field, and promote technical  exchanges in the industry, On May 15, UHPC Composite Beam  Technology Exchange and Full Length Bending Bearing  Capacity Test Viewing Meeting of Zhongshan to Kaiping  Expressway Project jointly organized by Guangdong Highway  Society, CLP Construction Road and Bridge Group Co., Ltd.,  and Zhonglu Dura International Engineering Co., Ltd. was  successfully held in Jiangmen, Guangdong.
 
The technology exchange and experiment observation meeting was chaired by Chen Guanxiong, chairman of Guangdong Highway Society, and Zong Dunfeng, chief engineer of China Electric Power Construction Group CO., Ltd., delivered a speech. Also present at the conference are: Liu Yangshao, vice president of Guangdong Highway Society, Yan Wenyao, vice chairman of Guangzhou Water Conservancy Society; Hu Liping, Deputy Director of Engineering Quality Division of Guangdong Provincial Transportation Department, Vice General Manager of CLP Construction Road and Bridge Group Co., Ltd. Bai Jiashe, Liu Hui Technical Director & Wu Binzhong, Liu Yong, assistant general manager (general manager of South China Branch) of CLP Construction Road and Bridge Group Co., Ltd., Hong Xiangcheng deputy chief engineer, Guangdong Communications Group, Secretary Han Dayong (General Manager of Zhongkai Company) and Chief Engineer He Dawei of South China Branch of CLP Construction Road and Bridge Group Co., Ltd., Deputy Managing Director of Chinese Power Construction (Guangdong) Zhongkai Expressway Co. Ltd., Korean Jianqiu and Zhu Wei, Su Jiaoke Group Co., Ltd. Traffic Regulation Court Yu liangde vice president (chief engineer), Zhonglu Dura International Engineering Co., Ltd. Chairman Mao Zhijian, general manager Liu Jun and other leaders.

The meeting was first presented by Cao Xueyong, Dean of Bridge Institude of Traffic Regulation Institude, Su Jiaoke Group Co., Ltd., “ UHPC Beam Design for Zhongkai Expressway”.
Dr. Fan Xueming, Dingxing Civil Engineering Studio, South China University of Technology, introduced “Full scale test of bending bearing capacity of 30m U-shaped UHPC composite beam in Zhong- Kai Highway project”. Tian Yueqiang, chief engineer of Zhonglu Dura International Engineering Co., Ltd., explained the construction of 30m span UHPC-NC composite beam on Zhongkai High Speed Torch No.3 Bridge.

At last, Sun Xiangdong, chief engineer of Guangdong Transportation Planning and Design Institute Group Co., Ltd., the chief editor of Technical Specification for Prestressed Ultra-high Performance Concrete Girder Bridges without Web Tendons, which is the group standard of the Guangdong highway society, made a field announcement about the group.

At the same time, the conference was also attended by Guangdong Highway Affairs Center, Guangdong Transportation Engineering cost Affairs Center, Guangdong Transportation Planning Research Center, Jiangmen City Communication Bureau, Shunde  District Traffic Bureau, Heshan City Communications Bureau, Dongguan Municipal Communications Bureau quality Supervision Station, China concrete Association UHPC Branch, Guangdong Shun Control Exchange, Hengshun Exchange, China Power Construction 11 Bureau, Guangdong University of Technology and other covered industry directors, associations, construction, leaders, experts and peers of 56 units in the fields of design, scientific research and construction there were more than 200 participants.

The Zhongshan- Kaiping Expressway project was built by China Electric Construction Road and Bridge Group Co., Ltd. and designed by Sujiaoke Group Corp., The project starts from Cuiheng New Area of Zhongshan city, which is a key project connecting Guangdong, Hong Kong and Macao Bay area. The total length of expressway route is 129.637 km. There are 47,631m / 29 extra-large bridges, 21,727m / 42 bridges and 1,422m / 27 bridges (including mainline bridges).

There are 767m / 2 mountain tunnels (average length of double holes) and 4030m / 2 sunken long tunnels. 25 interchanges; Set up 3 services areas. The No.3 bridge of the main line of Torch East service area in the first phase of Zhongshan section of this project adopts a 30-meter U-shaped UHPC composite beam. It is the first time that the 30-meter UHPC composite beam without web bars is applied to the highway bridge in China, which is a milestone in the history of highway bridge construction.

After the technical exchange meeting, the participants went to UHPC R&D and production base of Zhonglu Dura International Engineering CO., Ltd. At noon, the hot weather could not stop the enthusiasm of participants to observe the full scale test of bending bearing capacity of 30-meter U-shaped UHPC composite beam in Zhongkai Expressway. We do not want to miss the historical moment in China’s UHPC bridge field. The full scale test of bending bearing capacity of 30m U-shaped UHPC composite beam in Zhongkai Expressway project.

In order to verify the flexural capacity of UHPC composite beams without web tendons, South China University of Technology has made a detailed arrangement for this experiment. The final test results show that the actual bending bearing capacity of 30m U-shaped UHPC composite beam in Zhongkai Expressway project reaches 156% of the designed resistance value, the safety reserve is sufficient and the test is successful.

This technology exchange and observation activity has expanded the field of vision of the participants and enhanced the understanding of UHPC, enhance the confidence of domestics experts, scholars and owners in the use of new materials UHPC, and constantly promote the wide application of UHPC, so that more construction areas benefit from the new materials and new structure brought about by the significant improvement of the overall structure quality and efficiency.
Guangdong Road Institude Chairman Chen Guanxiong presided over the meeting.
Speech by Zong Dunfeng, Chief Engineer of China Electric Power Construction Group Limited.
The No.3 Bridge of Torch East Service Area in the First Phase of Zhongkai Expressway Zhongshan Section adopted a 30 meter U-shaped.
Zhonglu Dura International Engineering Co., Ltd. undertook the task of prefabrication of 30-meter and 35-meter U-shaped UHPC composition beams of NO.3 Bridge in the Torch East Service Area of the Zhongshan. Section of Zhongshan to Kaiping Expressway.
The participants went to UHPC R&D and production base of Zhonglu Dura International Engineering CO., Ltd.
The participants were learning the historical moments about UHPC bridge fields
The full scale test of bending bearing capacity of 30m U-shaped UHPC composite beam in Zhongkai Expressway project
The final test results show that the actual bending bearing capacity of 30m U-shaped UHPC composite beam in Zhongkai
The and production base of Zhonglu Dura International Engineering CO., Ltd
Guangdong Road Institude Chairman Chen Guanxiong presided over the meeting.
1/9 
start stop bwd fwd

© 2009-2021 by GPIUTMD